Tesla Model 3 Pre-cut Paint Protection Film Kits
Help protect your Model 3 from rock chips, road debris and everyday wear with precision-cut PPF. Choose the panels you want to cover, then confirm your exact model year and trim before ordering.
- Fitment checked before you pay
- Ships across Canada and the USA
- Replacement pieces at cost

Choose your Model 3 coverage
Silver, Gold and Platinum, with the panels each one includes. Starting prices in Canadian dollars; your exact price comes with the fitment check.

The Model 3 sits low, so the bumper and the front of the hood see the most gravel. Shown on a Model 3 for illustration; the Model 3 pieces follow your car’s own panel shapes.
$499CAD starting price*
- Partial hood
- Partial front fenders
- Front bumper
- Headlight lenses
- Side mirror caps
$699CAD starting price*
- Full hood
- Full front fenders
- Front bumper
- Headlight lenses
- Side mirror caps
- Door edge guards
$1,799CAD starting price*
- Full hood
- Full front fenders
- Front bumper
- Headlight lenses
- Side mirror caps
- Door edge guards
- Door panels
- Rear bumper
- Tailgate or trunk
- Roof panel
- Rocker panels
- Rear quarter panels
Where a Model 3 takes the most damage
- 1Front bumper
The lowest panel on the car and the first thing gravel hits. On a Model 3 it sits close to the road, so it chips early.
- 2Hood leading edge
Takes stone hits at highway speed. Chips usually start in the first third of the hood.
- 3Front fenders
The area just behind the front wheels catches grit thrown up by your own tires.
- 4Mirror caps
They stick out into the airflow and get scuffed in tight parking spots.
- 5Rocker panels
Low and close to the tires, so winter sand and salt sandblast them.
*These are starting prices. Your exact price depends on your car’s year and trim, and we confirm it after the fitment check.
Build a custom kit
Want just the hood, the bumper or a replacement piece? Pick what you need. We cut single pieces where we have a confirmed pattern for your Model 3, and we confirm the price before you pay.
Which Model 3 do you have?
One pattern does not fit every year. Find your body below, then choose it in the fitment check.
- 2017
- 2018
- 2019
- 2020
- 2021
- 2022
- 2023
Original Model 3
How to tell
- Rounder headlights
- Front bumper with fog-light openings in the lower corners
- Taillights that wrap onto the trunk lid
- 2024
- 2025
- 2026
Highland (refreshed)
How to tell
- Slimmer, sharper headlights
- Smooth front bumper with no fog-light openings
- C-shaped taillights
- 2024
- 2025
- 2026
Highland Performance
How to tell
- Its own front bumper with larger air intakes
- Rear spoiler and diffuser
- Badged Performance
The Highland body changed the bumper, headlights and hood shape, so original and Highland patterns are not interchangeable. The Highland Performance has its own bumper too. Pick your body and trim above, and we confirm the pattern before you pay.
Installing on a Model 3
Every kit ships with installation guidance. These are the things that matter most on this car.
- 1Start with the mirrors and headlights
Small, mostly flat pieces. They are a good way to get a feel for slip solution and the squeegee.
- 2Do the hood with a second person
It is one large piece. Two people can lift it, float it into place and keep it off the ground.
- 3Give the bumper its own session
The bumper has the most curves on a Model 3. Work from the center out and take your time on the corners.
- 4Watch for sensor cutouts
Older cars with front parking sensors need cutouts in the bumper piece. Tell us if yours has them.
Real feedback, clear terms
Feedback from verified buyers on our eBay store, word for word, with the product each one bought.
- 8 milClear TPU film with a self-healing top coat
- 10 yrFilm warranty; written terms come with your quote
- Before you payA person checks your fitment and pattern
- CA + USShipping across Canada and the USA
Exceptional seller! This marked my maiden venture into installing PPF on my Tesla. Throughout the process, the seller was incredibly supportive, promptly answering even my most basic questions. The final result was quite satisfactory - despite a few minor bubbles, the overall quality of the film was impressive. I would unreservedly recommend them and look forward to future purchases. A+++.
The PPF fits 100%. Great product quality.
very nice communication, quality film, very good packaging, highly recommended
Read all feedback on eBayWorry-Free DIY PolicyShipping and warranty questionsHow KitCutz compares
Model 3 PPF questions
Will a pre-2024 Model 3 kit fit a Highland?
No. The 2024 Highland refresh changed the bumper, headlights and hood shape, so the patterns are different. Choose your body in the fitment check and we confirm the right one before you pay.
Does the Model 3 Performance need a different pattern?
The Highland Performance has its own front bumper, so the bumper pieces are different. Older Performance cars mostly share their body with the Long Range. Tell us your year and trim and we check.
Can I buy only the hood or the front bumper?
Yes. Pick the pieces you want under "Build a custom kit" and send the request. We confirm the pattern and the price before you pay.
What is the most practical coverage for daily highway driving?
Most highway commuters go with Gold (full front): the full hood, full fenders, bumper, headlights and mirrors. Silver is a cheaper start that still covers the bumper and the front of the hood.
Is the Model 3 a good first DIY install?
Yes, as long as you start with the smaller pieces. Read how to prep your car first, and plan a calm, sheltered day for the hood and bumper.
Keep reading:Compare coverage packagesRequest a Model 3 kitHow to prep your carFive install mistakes to avoid
Ready to protect your Model 3?
Tell us your year and trim. We check the right cut before you pay.


